AKEED GREASE CUT
AKEED GREASE CUT is a powerful detergent particularly suited for the removal of greasy and ingrained soiling from floors and other hard surfaces. The product is a concentrated cleaner and may be used diluted with upto 100 volumes of water. It contains no solvents or perfumes, leaves no slippery residues, and produces a clean, taint-free finish.
AKEED GREASE CUT has many applications. It is used for cleaning interior and exterior walls and floors, washroom areas, kitchen and canteen areas. It gives excellent results on stainless steel and is ideal for canteen equipment including ovens, hot plate and deep dry fat fryers.
AKEED GREASE CUT is suitable for use on many surfaces including quarry, ceramic and vinyl tiles, concrete, paintwork, vinyl, stainless steel and chrome. Care should be taken, however, with aluminum or emulsion polished surfaces as concentrated solutions may damage these finishes.
Product Description
FEATURES :
|
BENEFITS :
|
DIRECTIONS FOR USE :
| Hard Surface Cleaning | : | Apply by mop, swab, sponge or in conjunction with rotary floor cleaning equipment. Use in warm or cold water diluted with up to 100 volumes of water dependent upon the degree of soiling to be removed |
| Oven, Hotplates, etc. | : | For stubborn deposits on ovens and hot plates, etc… Apply the product neat to the warm surface by spray or brush and allow 15-30 minutes soak prior to water rinsing |
| Deep Fat Fryers | : | Drain the cooking oil. Apply AKEED GREASE CUT to any thick deposits and fill the fryer with a solution of 1 volume of AKEED GREASE CUT to 10 volumes of hot water. Bring this to boil and simmer for 30 minutes before draining and rinsing thoroughly with water |
| Filter Cleaning | : | Brush neat AKEED GREASE CUT onto both sides of the filter, then soak in hot water, dosed with AKEED GREASE CUT depending on the degree of soiling. Allow 10 minutes soak time, rinse thoroughly with clean water and allow to dry |
CHARACTERISTICS:
| Appearance | : | Slightly turbid, bright green, free-flowing liquid |
| Odour | : | Slight |
| Specific Gravity | : | Typically 1.03 |
| Solubility | : | Water soluble |
| Flammability | : | Non-flammable |
| pH of Concentrate | : | Typically 13.0 |
| pH of Solution | : | Typically 10.0 |
| Use Concentration | : | General use – Diluted with 50-100 volumes of water. Heavy duty use – Diluted with 10-25 volumes of water. Oven cleaning – Use neat or diluted with up to 4 volumes of water. |
| Use Temperature | : | Best results are obtained with warm water |
| Corrosive Action | : | Concentrated solutions will etch aluminum, zinc and their alloys and may be detrimental to vinyl and emulsion polished surfaces |
| Packaging | : | Cartons of 4 x 4 litre plastic containers |
| Storage Conditions | : | Store in closed containers |
HEALTH AND SAFETY INFORMATION:
| Safety Advice | : | IRRITANT AND CORROSIVE. Irritating to eyes and skin. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Do not mix with other chemical products unless specifically directed |
| First Aid | : | Wash splashes from skin with soap and water. For splashes to eyes, flush thoroughly with water. If swallowed, DO NOT INDUCE VOMITING, give water or milk to drink. Medical attention should be obtained following splashes to eyes or if swallowed |
| Spillage | : | Small spillage may be flushed to foul sewer with plenty of water. Larger spillage should be absorbed with mineral absorbent and collected up for disposal as waste. |
SAFETY DATA SHEET
AKEED GREASE CUT
1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY
| PRODUCT NAME | : | AKEED GREASE CUT |
| SUPPLIER | : | MASHAL CHEMICAL INDUSTRY WLL P. O. Box 26694 Manama, Bahrain |
| TELEPHONE | : | (0973)17830500 |
2. COMPOSITION/INFORMATION ON INGREDIENTS:
| INGREDIENT NAME | CAS NO. | CONTENTS | HEALTH (CLASS) | RISK(R No) |
| Sodium Hydroxide | 1310-73-2 | 6.0 % | C | 35 |
3. HAZARDS IDENTIFICATION:
Causes burns
4. FIRST AID MEASURES:
| EYES | : | Promptly wash eyes with lots of water while lifting the eye lids. Get medical attention immediately. Continue to rinse |
| SKIN | : | Promptly wash contaminated skin with soap or mild detergent and water. Promptly remove clothing if soaked through and wash as above. Get medical attention if irritation persists after washing |
| INHALATION | : | No recommendation given, but first aid may still be required in case of accidental exposure, inhalation or ingestion of this chemical. If in doubt, GET MEDICAL ATTENTION PROMPTLY! |
| INGESTION | : | DO NOT INDUCE VOMITING. Get medical attention immediately. Promptly let affected drink lots of water to dilute the swallowed chemical. Give milk instead of water if readily available. NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! |
5. FIRE FIGHTING MEASURES:
This material is not flammable
6. ACCIDENTAL RELEASE MEASURES:
SPILL CLEANUP METHODS:
Collect with absorbent, non-combustible material into suitable containers. Containers to be collected by waste disposal contractors. Wear suitable protective clothing.
7. HANDLING AND STORAGE:
USAGE PRECAUTIONS:
Avoid spilling, skin and eye contact. Read and follow manufacturer’s recommendations
STORAGE PRECAUTIONS:
Keep in cool, dry, ventilated storage and closed containers.
STORAGE CRITERIA :
Corrosive storage.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION:
| INGREDIENT NAME | CAS NO. | STD: | LT EXP.8HRS (8 hrs) | STEXP.15 MIN:(10 min) |
| SODIUM HYDROXIDE | 1310-73-2 | OES | No std. | 2mg/m3 |
PROTECTIVE EQUIPMENT:
Spectacles.
PROTECTIVE GLOVES:
Specific hand protection noted, but gloves may still be advisable.
EYE PROTECTION:
Wear approved safety goggles
9. PHYSICAL AND CHEMICAL PROPERTIES:
| COLOUR | : | Bright Green |
| APPEARANCE | : | Liquid |
| SPECIFIC GRAVITY(Water=1) | : | 1.06 |
| pH-VALUE, CONC. | : | 13 |
10. STABILITY AND REACTIVITY:
STABILITY: No particular stability concerns.
11. TOXICOLOGICAL INFORMATION:
ACUTE AND CHRONIC HEALTH HAZARDS:
No specific acute or chronic health impact noted, but this chemical may still have adverse impact on human health, either in general or on certain individuals with pre-existing or latent health problems.
12. ECOLOGICAL INFORMATION:
ACUTE FISH TOXICITY: No data available
WATER HAZARD CLASSIFICATION: No data available
13. DISPOSAL CONSIDERATIONS:
DISPOSAL METHODS: Do not allow runoff to sewer, waterway or ground. Contact specialist disposal companies.
14. TRANSPORT INFORMATION:
| Road | : | |
| UN No. | : | 1719td |
| ADR CLASS | : | 8 |
| ADR ITEM NO. | : | 8,66(b) |
| AIR TRANSPORT | : | |
| UN NO., AIR | : | 1719 |
| AIR TRANSPORT CLASS NO. | : | 8 |
| SEA | : | |
| UN No. | : | 1719 |
| SEA TRANSPORT CLASS NO. | : | 8 |
| SEA PACK GR | : | 11 |
| IMCO LABEL | : | 8 |
| RAIL | : |
15. REGULATORY INFORMATION:
LABEL FOR SUPPLY: Corrosive
RISK PHRASES: R-34 Causes burns
SAFETY PHRASES:
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-45 In case of accidents or if you feel unwell, seek medical advice immediately (show the label where possible)
S-24/25 Avoid contact with skin and eyes.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection
REGULATORY REFERENCES:
Chemicals (Hazard Information & Packaging) Regulations
16. OTHER INFORMATION:
USERS NOTE:
For further information or advice, contact our technical service line during regular office hours on 097317830500.
